Effect of Co doping on the electrochemical properties of Sr2Fe1.5Mo0.5O6 electrode for solid oxide fuel cell

Co is doped to Sr2Fe1.5Mo0.5O6 to enhance its electrochemical activity as the cathode for intermediate-temperature solid oxide fuel cells. Pure cubic perovskites of Sr2Fe1.5−xCoxMo0.5O6 (SF1.5−xCxM, x = 0, 0.5, 1) are synthesized using a glycine-nitrate combustion progress. The average thermal expansion coefficient varies from 15.8 to 19.8 × 10−6 K−1. The electrical conductivity increases while its activation energy decreases with increasing Co content. X-ray photoelectron spectroscopy analysis demonstrates mixed valences of Fe, Co and Mo, suggesting small polaron hopping mechanism. Electrical conductivity relaxation (ECR) measurement shows that the surface exchange coefficient increases about two orders of magnitude when the content increases from x = 0 to x = 1.0, i.e. from 2.55 × 10−5 to 2.20 × 10−3 cm s−1 at 750 °C. ECR also exhibits that chemical diffusion coefficient increases with Co content. Density Functional Theory calculation demonstrates that oxygen vacancy formation energy decreases with Co content, suggesting high oxygen vacancy concentration at high Co content. Impedance spectroscopy on symmetric cells consisting of SF1.5−xCxM electrodes and La0.8Sr0.2Ga0.8Mg0.2O3−δ electrolytes shows that Co doping is very effective in reducing the interfacial polarization resistance, from 0.105 Ω cm2 to 0.056 Ω cm2 at 750 °C. These results suggest that Co doping into Sr2Fe1.5Mo0.5O6 can substantially improve its electrochemical performance.

► Co is doped to Sr2Fe1.5Mo0.5O6 double perovskite by glycine-nitrate progress. ► Electronic conductivity is increased by Co doping. ► Oxygen surface exchange kinetics is enhanced by Co doping. ► Interface polarization resistance is decreased by Co doping.