Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1282419 | International Journal of Hydrogen Energy | 2011 | 14 Pages |
Hydrogen can be produced by autothermal reforming of glycerol using supercritical water (SCW). With the aid of AspenPlus™, a systematic thermodynamic analysis of this process has been carried out by the total Gibbs free energy minimization method, which computes the equilibrium composition of synthesis gas (syngas). The predictive Soave-Redlich-Kwong equation of state (EOS) has been used as thermodynamic method in the simulation of the supercritical region. A sensitivity analysis has been conducted both for a pure glycerol feed and pretreated crude glycerol feed coming from biodiesel production. Simulations run so as to calculate the O2 needed to enter the Gibbs reactor (reformer) for achieving the thermoneutral condition (no external heat to sustain the reformer operation is required). Thus, the effect of the main operating parameters (reforming temperature, water to glycerol mole ratio, glycerol purity in the feed of crude glycerol, oxygen to glycerol mole ratio and the inlet feed temperature) aimed to the hydrogen production has been investigated, by obtaining the mole fraction and molar flow-rate of components in syngas, as well as the hydrogen yield. By this way, the most thermodynamic favorable operating conditions at which glycerol may be converted into hydrogen by autothermal reforming using SCW have been identified. As a second part of the study, a conceptual design and an energy and exergy analysis of the overall process will be performed later.
► Hydrogen can be produced by autothermal reforming of glycerol using supercritical water. ► A systematic thermodynamic analysis was performed by minimizing the Gibbs free energy. ► A sensitivity analysis was conducted both for a pure glycerol feed and pretreated crude glycerol feed. ► The effect of the main operating parameters aimed to the hydrogen production was investigated. ► The most thermodynamic favorable operating conditions for obtaining hydrogen were identified.