Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1282741 | International Journal of Hydrogen Energy | 2010 | 12 Pages |
The effects of gas diffusion layer’s (GDL’s) anisotropic bending stiffness on the electrochemical performances of polymer electrolyte membrane fuel cells have been investigated for carbon fiber-felt and -paper GDLs. The bending stiffness values of all GDLs in the machine direction are higher than those in the cross-machine direction. We have prepared GDL sheet samples such that the machine direction of GDL roll is aligned with the major flow field direction of a metallic bipolar plate at angles of 0° (parallel: ‘0° GDL’) and 90° (perpendicular: ‘90° GDL’). The I–V performances of all the 5-cell stacks with 90° GDLs are higher than those with 0° GDLs. All the 5-cell stacks with 90° GDLs show lower values of high-frequency resistance (HFR) than those with 0° GDLs. However, the gas pressure differences at both anode and cathode of 5-cell stacks with 90° GDLs appear to be similar to or slightly lower than those with 0° GDLs, making the lower HFR as a dominant factor for the improved I–V performances. This may result from the reduced intrusion of 90° GDLs into gas channels than 0° GDLs as observed by less thickness reduction under compression of 90° GDLs. A 45° GDL (skew alignment) also shows better performances than the 0° GDL.