| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1564965 | Journal of Nuclear Materials | 2014 | 7 Pages |
Abstract
The present investigation aimed at researching the mechanical properties of the oxide dispersion strengthened (ODS) ferritic steels with different Cr content, which were fabricated through a consolidation of mechanical alloyed (MA) powders of 0.35 wt.% nano Y2O3 dispersed Fe-12.0Cr-0.5Ti-1.0W (alloy A), Fe-16.0Cr-0.5Ti-1.0W (alloy B), and Fe-18.0Cr-0.5Ti-1.0W (alloy C) alloys (all in wt.%) by hot isostatic pressing (HIP) with 100 MPa pressure at 1150 °C for 3 h. The mechanical properties, including the tensile strength, hardness, and impact fracture toughness were tested by universal testers, while Young's modulus was determined by ultrasonic wave non-destructive tester. It was found that the relationship between Cr content and the strength of ODS ferritic steels was not a proportional relationship. However, too high a Cr content will cause the precipitation of Cr-enriched segregation phase, which is detrimental to the ductility of ODS ferritic steels.
Related Topics
Physical Sciences and Engineering
Energy
Nuclear Energy and Engineering
Authors
Shaofu Li, Zhangjian Zhou, Jinsung Jang, Man Wang, Helong Hu, Hongying Sun, Lei Zou, Guangming Zhang, Liwei Zhang,