Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1565900 | Journal of Nuclear Materials | 2012 | 8 Pages |
Abstract
To evaluate the lifetime of the beam window of an accelerator-driven transmutation system (ADS), post irradiation examination (PIE) of the STIP (SINQ target irradiation program, SINQ; Swiss spallation neutron source) specimens was carried out. The specimens tested in this study were made from the austenitic steel Japan primary candidate alloy (JPCA). The specimens were irradiated at SINQ Target 4 (STIP-II) with high-energy protons and spallation neutrons. The irradiation conditions were as follows: the proton energy was 580 MeV, irradiation temperatures ranged from 100 to 430 °C, and displacement damage levels ranged from 7.1 to 19.5 dpa. Tensile tests were performed in air at room temperature (RT), 250 °C and 350 °C. Fracture surface observation after the tests was done by Scanning electron microscope (SEM). Results of the tensile tests performed at R.T. showed the extra hardening of JPCA at higher dose compared to the fission neutron irradiated data. At the higher temperatures, 250 °C and 350 °C, the extra hardening was not observed. Degradation of ductility bottomed around 10 dpa, and specimens kept their ductility until 19.5 dpa. All specimens fractured in ductile manner.
Related Topics
Physical Sciences and Engineering
Energy
Nuclear Energy and Engineering
Authors
Shigeru Saito, Kenji Kikuchi, Dai Hamaguchi, Kouji Usami, Shinya Endo, Katsuto Ono, Hiroki Matsui, Masayoshi Kawai, Yong Dai,