New nano-particle-strengthened ferritic/martensitic steels by conventional thermo-mechanical treatment

For increased fusion power plant efficiency, steels for operation at 650 °C and higher are sought. Based on the science of precipitate strengthening, a thermo-mechanical treatment (TMT) was developed that increased the strength from room temperature to 700 °C of commercial nitrogen-containing steels and new steels designed for the TMT. At 700 °C increases in yield stress of 80 and 200% were observed for a commercial steel and a new steel, respectively, compared to commercial normalized-and-tempered steels. Creep–rupture strength was similarly improved. Depending on the TMT, precipitates were up to eight-times smaller at a number density four orders of magnitude greater than those in a conventionally heat treated steel of similar composition.