Article ID Journal Published Year Pages File Type
1569780 Journal of Nuclear Materials 2006 8 Pages PDF
Abstract

Tensile testing has been performed at 25 and at ∼400 °C on two ferritic/martensitic steels (JFMS and HT-9) after irradiation in FFTF to up to ∼70 dpa at 373–433 °C. As observed in previous studies, this range of irradiation temperatures has a significant effect on hardening. The percent increase in yield stress decreases with increasing irradiation temperature from 373 to 433 °C. The JFMS alloy, which has 0.7 wt% silicon, exhibits approximately a factor of two increase in yield strength between tests at 427 and at 373 °C, and shows an increase in hardening with increasing dose. A comparison of the JFMS tensile properties to the properties of other ferritic/martensitic steels suggests that this hardening is due to precipitation of a Si-rich laves phase in this alloy. The HT-9 alloy, which contains more chromium and more carbon but less silicon (0.2 wt%), less molybdenum and less nickel, hardens during irradiation at 373 °C, but shows less hardening for irradiations performed at 427 °C and no increase in yield stress with increasing dose beyond 10 dpa.

Keywords
Related Topics
Physical Sciences and Engineering Energy Nuclear Energy and Engineering
Authors
, , , , , , , ,