Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1787727 | Current Applied Physics | 2011 | 5 Pages |
Abstract
The crystallization of amorphous silicon (a-Si) film and the electrical activation of dopants have been systematically studied. The crystallization of a-Si was realized by depositing an a-Si film of 800Â Ã
thickness on a glass substrate using a Ni phase transformation catalyst, followed by annealing at 550 °C. Electrical activation and crystallization were accomplished at the same time and the effect has been compared with the normal process. Resistance changes with respect to the doses in three different crystalline structures, amorphous, poly and single crystalline silicon, have been compared to find the optimum saturation dose and annealing temperature. The grain boundary effect on the resistance at different doses was intensively studied in this work. The minimum resistance of 224 Ω/⡠in a boron-doped poly-silicon thin film was obtained by annealing in a furnace at 550 °C, and 177 Ω/⡠was obtained in boron-doped amorphous silicon thin film annealed by RTA for 1 min.
Related Topics
Physical Sciences and Engineering
Physics and Astronomy
Condensed Matter Physics
Authors
Yong-Woo Lee, Sang-Joo Lee, Seung-Jae Yun, Seung-Ki Joo,