| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1985708 | International Journal of Biological Macromolecules | 2016 | 8 Pages |
•Novel surface modified CA UF membranes were successfully made-up by the phase inversion technique.•The SMMs blended CA membranes showed higher water permeation, hydrophilicity, FRR and MWCO.•cSMM-3 membrane exhibited the best antifouling tendency when the feed was an aqueous HA solution.
Surface modifying macromolecules (SMMs) were synthesized with various polyurethane pre polymers end-capped with different groups and blended into the casting solution of cellulose acetate (CA) to prepare surface modified ultra-filtration (UF) membranes for water filtration applications. The surface modification of the CA membranes was confirmed by the FTIR and static contact angle (SCA) measurements. The membranes so prepared had the typical characteristics of UF membranes as confirmed by scanning electron microscopy (SEM). Membrane properties were studied in terms of membrane compaction, percentage water content (%WC), pure water flux (PWF), membrane hydraulic resistance (Rm), molecular weight cut-off (MWCO), average pore size and porosity. The result showed that PWF, %WC, MWCO and pore size increased whereas the Rm decreased by the addition of SMMs. The significant effect of SMMs on the fouling by humic acid (HA) was also observed. It was found that the cSMM-3 membrane, in which SMM was synthesized with diethylene glycol (DEG) and hydroxyl benzene sulfonate (HBS) was blended, had the highest flux recovery ratio FRR (84.6%), as well as the lowest irreversible fouling (15.4%), confirming their improved antifouling properties. Thus, the SMM modified CA membranes had proven, to play an important role in the water treatment by UF.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide
