| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 239904 | Procedia Chemistry | 2012 | 8 Pages |
Chitosan fiber is one of the potential fibers that can be used as absorbable monofilament suture in biomedical application. In chitosan synthesis, aside from deproteination and deacetylation, demineralization is a crucial step where the major minerals within crustacean shells are removed. This demineralization process is carried out with two parameters, i.e. time and temperature. This research studies the influence of demineralization time on the diameter, tensile properties and biodegradability of chitosan fibers. Chitosan was synthesized from shrimp shells using 1 × 2 h and 3 × 2 h demineralization process. Chitosan fibers were produced by means of wet spinning. The chemical properties of chitosan fibers were characterized by means of Fourier Transform Infrared (FTIR) spectroscopy and X-Ray Diffractometry (XRD) technique. Physical properties characterization was carried out to measure the fibers’ diameter, density and viscosity. Tensile properties were evaluated by means of tensile test. The results were compared to standard of absorbable suture from the United States Pharmacopoeia (USP). Furthermore, in vitro degradation testing was also performed for analyzing biodegradation properties. Chitosan fibers were successfully made with diameter and maximum tensile force of chitosan fibers in a range of 364 - 460 μm and 5.6 - 8.3 N, respectively. The results of this research pointed that adding demineralization time would increase the diameter of chitosan fiber. However, the degradation occurred in prolonged demineralization process broke the bonds within the fiber which lead to a decrease in fiber's density. It is due to the degradation of chitosan occurred during extended demineralization process, which leads to degree of crystallinity reduction. Extensive demineralization process has been found to lower fibers’ tensile strength from 80.4 MPa to 38.4 MPa (52.2%), but increase their biodegradability by 17% and maximum elongation from 6.9% to 16.2% (136%). Despite that extensive demineralization process lowered chitosan fiber's tensile strength, both fibers made could still fit the standard for synthetic absorbable suture from USP number 0 and 1.
