Article ID Journal Published Year Pages File Type
243723 Applied Energy 2012 7 Pages PDF
Abstract

The influence of a ferrous picrate based homogeneous combustion catalyst on the combustion characteristics and fuel efficiency was studied using a fully instrumented diesel engine. A naturally aspirated four stroke, single cylinder, air cooled, direct injection diesel engine was tested at engine speeds of 2800 rpm, 3200 rpm and 3600 rpm under variable load conditions, with different dosing ratio of the catalyst in a commercial diesel fuel. The results indicated that the brake specific fuel consumption decreased and the brake thermal efficiency increased with the addition of the catalyst. At the catalyst dosing ratio of 1:10,000, the brake specific fuel consumption was reduced by 3.3–4.2% at light engine load of 0.12 MPa and 2.0–2.4% at heavy engine load of 0.4 MPa due to the application of the catalyst. From the in-cylinder pressure and heat release rate analysis, it was found that the catalyst reduced ignition delay and combustion duration of fuel in the engine, resulting in slightly higher peak cylinder pressure and faster heat release rate.

► A ferrous-picrate catalyst has been shown to improve diesel engine efficiency. ► The fuel consumption is reduced by up to 4.2% with the use of the catalyst. ► The catalyst shortens ignition delay and combustion duration.

Related Topics
Physical Sciences and Engineering Energy Energy Engineering and Power Technology
Authors
, , ,