The effect of injection timing and intake valve close timing on performance and emissions of diesel PCCI engine with a full engine cycle CFD simulation

A full-cycle computational fluid dynamics (CFD) simulation coupled with detailed chemical kinetics mechanism has been used to investigate the effect of start of injection (SOI) timing and intake valve close (IVC) timing on performance and emissions of diesel premixed charge compression ignition (PCCI) engine. By sweeping SOI timing from −35 to −5 °CA ATDC and IVC timing from −140 to −80 °CA ATDC with fixed 50% exhaust gas recirculation (EGR) and 1.8 bar intake pressure, the contour plots for ignition timing, nitric oxides (NOx), soot, hydrocarbon (HC), carbon monoxide (CO), indicated specific fuel consumption (ISFC), and ringing intensity have been developed. The results indicate that the operating range can be divided into kinetically controlled region and mixing-controlled region, in which the ignition timing is solely controlled by IVC timing and SOI timing respectively. To Minimize HC, CO, NOx and soot emissions, SOI timing must be carefully adjusted within a limited range. With the retarded IVC timing, the operating range of SOI becomes wider for clean combustion. The IVC timing should be optimized with consideration of ignition timing and combustion efficiency at different SOI timing in order to improve fuel economy. For purpose of avoiding engine knock, the SOI timing around −20 °CA ATDC and early IVC timing are pursued.

► A full-cycle CFD simulation was used to investigate the effect of SOI and IVC timing on diesel PCCI combustion. ► The operating range is divided into kinetically controlled and mixing-controlled regions with the variation of IVC and SOI timing. ► The equivalence ratio-temperature map was constructed for deep understanding of the source of NOx and soot emissions. ► The final clean combustion region was identified for PCCI engine with various SOI and IVC timings.