Initial moisture content in raw material can profoundly influence high shear wet granulation process

The aim of this work is to demonstrate that uncontrolled initial moisture content in microcrystalline cellulose (MCC) can profoundly affect high shear wet granulation (HSWG) process. We show that granule tabletability is reduced by approximately 50% when initial moisture content in MCC increases from 0.9% to 10.5% while all other processing parameters remain unchanged. An important observation is that granule tableting performance deteriorates significantly when initial moisture content increases from 2.6% to 4.9%, which is considered normal variation in moisture content for typical MCC (3–5%). The deteriorated tabletability is largely caused by increased granule size. On the other hand, granule flowability improves continuously with increasing initial moisture content in MCC. The improved flowability is mainly a result of granule size enlargement. Clearly, moisture content of raw materials for a HSWG process must be carefully monitored and controlled to ensure a robust manufacturing process as required by the quality-by-design principle.

Graphical abstractIncreasing moisture content in the raw microcrystalline cellulose leads to drastic deterioration of tabletability of the powder prepared by high shear wet granulation.Figure optionsDownload full-size imageDownload as PowerPoint slide