| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 35976 | Process Biochemistry | 2007 | 6 Pages |
To improve the purification efficiency of recombinant hepatitis B surface antigen derived from Hansenula polymorpha (Hans-HBsAg), a serial of absorbents for hydrophobic interaction chromatography with the controllable ligand density and spacer arm were synthesized, then developed and further applied to purify Hans-HBsAg. The absorbent, Butyl-S QZT with the ligand density of 25 μmol/(g wet gel) and spacer arm of 3C, was screened out and its physical and chemical properties were evaluated. High rigidity and low backpressure (<0.06 MPa) were obtained at the flow rate up to 20 ml/min. Moreover, it has the stable chemical characteristics of subjecting to high concentrations of acid, alkali and detergents. This HIC absorbent was further applied to purify Hans-HBsAg with the recovery 94% and purification-fold 9 under the optimized operation condition at pH 6.5 and concentration of ammonium sulfate 7.5%. Finally, the HIC adsorbent of Butyl-S QZT was applied in the integrated three-step chromatographic purification process to purify Hans-HBsAg. About 140 mg of purified Hans-HBsAg was obtained from 1 l cell disruption supernatant at the total recovery of 27% and the purification-fold of 151.8. Based on the assay of SDS-PAGE and SEC-HPLC, the purity of the purified HBsAg was over 99% to meet the requirement for the further inoculation use.
