Recurrent modified Elman neural network control of PM synchronous generator system using wind turbine emulator of PM synchronous servo motor drive

•The recurrent modified Elman NN is to control the three-phase PMSG system.•A PMSM drive system is designed to generate the maximum power for the PMSG system.•The online training recurrent modified Elman NN is developed for the controller.•The recurrent modified Elman NN controller improves the voltage performance.

The recurrent modified Elman neural network (NN) controlled a permanent magnet (PM) synchronous generator system, which is driven by wind turbine emulator of a PM synchronous motor servo drive, is developed to regulate output voltage of rectifier (or AC to DC power converter) and inverter (or DC to AC power converter) in this study. First, the wind turbine emulator of a closed loop PM synchronous motor servo drive is designed to produce the maximum power for the PM synchronous generator system. Then, the rotor speed of the PM synchronous generator, the output DC bus voltage and current of the rectifier are detected simultaneously to yield maximum power output of the rectifier through DC bus power control. Because the PM synchronous generator system is a nonlinear and time varying dynamic system, the online training recurrent modified Elman NN control system is developed to regulate DC bus voltage of the rectifier and AC line voltage of the inverter in order to improve the control performance. Furthermore, the online training recurrent modified Elman NN control system with the variable learning rate is derived based on Lyapunov stability theorem, so that the stability of the system can be guaranteed. Finally, some experimental results are verified to show the effectiveness of the proposed recurrent modified Elman NN controlled PM synchronous generator system.