Article ID Journal Published Year Pages File Type
4916054 Applied Energy 2017 15 Pages PDF
Abstract
Swirl assisted oxy-methane combustion investigated here has focused on the impact of carbon dioxide dilution. Carbon dioxide dilution is essential as it lowers the flame adiabatic temperature and flame speed of oxy-fuel combustion leading to a more stable operation. However, carbon dioxide dilution may result in flame fluctuations, under fuel lean conditions. Experiments using a swirl burner examined the flame fluctuations with different amounts of CO2 dilution, with the goal to achieve stable oxy-CO2-methane combustion via colorless distributed combustion (CDC). This novel CDC technique has shown significant performance gains in gaseous fuel-air flames on emission reduction, enhanced thermal field uniformity, noise reduction, and improved flame stability. Results have shown that for oxy-CO2-fuel combustion, most of the heat release fluctuations had frequencies below 60 Hz. The results obtained revealed that increase in CO2 dilution increased the magnitude of flame fluctuation till a maximum of 28% O2 concentration in the oxidizer. Further increase in dilution gases and reduction in O2 concentration led to a more stable flame, along with more favorable conditions for colorless distributed combustion. Data analysis of flame images revealed the source of oscillations under different conditions. At maximum fluctuations with 28% O2, the flame oscillated between two modes leading to unstable operation and large fluctuation in the heat release signal. Decrease in oxygen concentration to below 27%, promoted a more stable flame behavior, occupying a larger flame volume, which is characteristic of distributed combustion. Further reduction in O2 led to flame blow off at around 21% O2. This work outlines the importance CO2 dilution in oxy-fuel flames for achieving stable distributed combustion and mitigate the increased oscillations normally encountered in higher oxygen concentration flames.
Related Topics
Physical Sciences and Engineering Energy Energy Engineering and Power Technology
Authors
, ,