Article ID Journal Published Year Pages File Type
4987354 Chemical Engineering Research and Design 2017 10 Pages PDF
Abstract

•A simple method to improve the centrifugal air classifier performance is proposed.•Insertion of fine particle outlet significantly affects classification efficiency.•An appropriate range of the fine particle outlet diameter is suggested.•RSM was proven to be a suitable model for the simulation of the air classifier.•A better match between the primary and secondary air velocities was obtained.

A fine particle outlet was designed and introduced to a centrifugal air classifier to improve its classification performance. Effects of the inserted depth and diameter of fine particle outlet were investigated experimentally and numerically. The turbulent airflow was modeled using the Reynolds Stress Model. The calculated pressure drop of the classifier agrees well with the experimental date. The experimental results indicate that the insertion of fine particle outlet significantly enhanced the particle classification efficiency. Optimal particle classification can be achieved when the fine particle outlet inserted depth ratio is 0.5. Increasing the fine particle outlet diameter decreases both the tangential velocity and the turbulent intensity, thereby increasing the cut size. Both too large and too small fine particle outlet diameters lead to poor classification performance. Moreover, the fine particle outlet diameter has a more significant effect on pressure drop compared to the insertion of fine particle outlet. The obtained results can provide a guideline for design of the centrifugal classifier.

Graphical abstractDownload high-res image (193KB)Download full-size image

Related Topics
Physical Sciences and Engineering Chemical Engineering Filtration and Separation
Authors
, , , , , ,