Article ID Journal Published Year Pages File Type
5000652 Diamond and Related Materials 2017 6 Pages PDF
Abstract

•We have fabricated a vertical switch with SCD substrate and SCD cantilever.•We have obtained the Young's modulus of SCD by two different experimental methods.•The roughness of etching area was only about 1.5 nm, indicating a smooth surface morphology.

A single crystal diamond (SCD) cantilever has been fabricated on HPHT diamond substrate by using ion implantation and patterning technique. Firstly, the carbon ions were vertically implanted into diamond substrate to create a non-diamond layer. Secondly, the diamond substrate was treated with photolithography and metal evaporation techniques to fabricate the desired cantilever pattern. Thirdly, a dry etching technique was used to selectively remove the defined regions. Then an electrochemical etching method was used to etch off non-diamond layer from the substrate. Furthermore, the mechanical properties of the suspended SCD cantilever have been investigated by atomic force microscopy. A Young's modulus of 907 GPa was estimated using the beam bending theory. At the final stage, an electrostatic actuator of SCD cantilever as a vertical switch device was realized.

Graphical abstractDownload high-res image (84KB)Download full-size image

Related Topics
Physical Sciences and Engineering Engineering Electrical and Electronic Engineering
Authors
, , , , , , , , , , ,