Life cycle assessment of carbon capture and utilization from ammonia process in Mexico

•PS and LCA were combined successfully to reduce operation costs and GHG emissions.•CO2 emission free from the ammonia production process was reached.•By using the proposed methodology improvements for PCC were obtained.•The PCC of the primary reformer flue gases of any ammonia plant is viable.

Post-combustion CO2 capture (PCC) of flue gas from an ammonia plant (AP) and the environmental performance of the carbon capture utilization (CCU) technology for greenhouse gas (GHG) emissions to an enhanced oil recovery (EOR) system in Mexico was performed as case study. The process simulations (PS) and life cycle assessment (LCA) were used as supporting tools to quantify the CO2 capture and their environmental impacts, respectively. Two scenarios were considered: 1) the AP with its shift and CO2 removal unit and 2) Scenario 1 plus PCC of the flue gas from the AP primary reformer (AP-2CO2) and the global warming (GW) impact. Also, the GW of the whole of a CO2-EOR project, from these two streams of captured CO2, was evaluated. Results show that 372,426 tCO2/year can be PCC from the flue gas of the primary reformer and 480,000 tons/y of capacity from the AP. The energy requirement for solvent regeneration is estimated to be 2.8 MJ/kgCO2 or a GW impact of 0.22 kgCO2e/kgCO2 captured. GW performances are 297.6 kgCO2e emitted/barrel (bbl) for scenario one, and 106.5 kgCO2e emitted/bbl for the second. The net emissions, in scenario one, were 0.52 tCO2e/bbl and 0.33 tCO2e/bbl in scenario two. Based on PS, this study could be used to evaluate the potential of CO2 capture of 4080 t/d of 4 ammonia plants. The integration of PS-LCA to a PCC study allows the applicability as methodological framework for the development of a cluster of projects in which of CO2 could be recycled back to fuel, chemical, petrochemical products or for enhanced oil recovery (EOR). With AP-2CO2, “CO2 emission free” ammonia production could be achieved.

Graphical abstractScheme of potential CO2 capture from four primary reformer flue gases plus Shift & CO2 removal unit (AP-2CO2) in the CPC to be recycled back to fuel, chemical, petrochemical products or EOR.Download high-res image (231KB)Download full-size image