| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 538834 | Displays | 2013 | 6 Pages |
The effect of various positions and thicknesses of cesium chloride (CsCl) layer in organic light-emitting diodes is investigated. The basic device configuration is indium–tin–oxide (ITO)/N,N′-bis-(1-naphthl)-diphenyl-1,1′-biphenyl-4,4′-diamine (NPB)/tris (8-hydroxyquinoline) aluminum (Alq3)/aluminum (Al). The following results are demonstrated. When the CsCl layer is placed at the Alq3/Al interface and closer to the Al cathode inside Alq3 layer, the effective barrier to electron injection is reduced due to the reaction between Cs and Al. As a result, the injection of electrons and holes is more balanced and the efficiency is enhanced from 1.83 to 3.49 cd/A. And as an electron injection layer, CsCl can be comparable with lithium fluoride (LiF). If the distance of the CsCl layer is more than 20 nm from Alq3/Al interface inside Alq3 layer, the luminance and efficiency are enhanced but the injection is not increased, which is attributed to trap sites induced by the CsCl layer. The decrease of luminance and efficiency is observed when the CsCl layer is located at the NPB/Alq3 interface. The reason is exciton quenching due to charge transfer from metal Cs to organic material Alq3. The CsCl layer inside NPB layer plays a role of hole blocking. More balanced injection of carriers is expected. Subsequently, both luminance and efficiency are enhanced by 34% and 60%, respectively. When the cathode of lithium fluoride (LiF)/Al is used, the device efficiency is also improved from 4.0 to 5.0 cd/A by inserting the CsCl layer inside NPB layer. However, the improvement is not observed for the device with the CsCl layer inserted inside Alq3 layer in LiF/Al-OLED.
► Cesium chloride (CsCl) layer can improve the carrier balance in OLED. ► Carriers are balanced by CsCl layer inside NPB due to blocking hole injection. ► Better balance is due to enhanced electron injection by CsCl at Alq3/Al interface. ► Carriers are more balanced for CsCl inside Alq3 traps holes leakage to the cathode. ► Quenching effect is observed if CsCl is inserted at NPB/Alq3 interface.
