Improvement of picture quality of high Xe content plasma display panels based on facing discharge suppression

This paper presents a waveform for driving a high-resolution plasma display panel (PDP) which uses a gas mixture of high Xe content. To prevent degradation of picture quality due to unstable discharges between two facing electrodes, the common electrode was biased at a negative voltage during the set-up period, and the data electrode was biased at a positive voltage during the sustain period. A pre-reset pulse was used before the first reset to reduce the reset voltage and to form a proper wall charge state for sustain discharges. This waveform could drive a 15% Xe 42 in. XGA (1024 × 768) PDP with the single-scan method. The measured black luminescence, peak luminescence, and contrast ratio were 0.45, 1490 cd/m2, and 3310:1, respectively. The measured margin of the sustain voltage was better than ±10 V.