Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
5441449 | Journal of Non-Crystalline Solids | 2017 | 8 Pages |
Abstract
We report on electrical noise measurements of p-type a-Si:H thin films prepared by plasma enhanced chemical vapor deposition. Samples were grown at various boron concentrations and hydrogen dilution of the silane precursor. Measurements were made at temperatures ranging from 210 K to 450 K. In this temperature range, Mott variable range hopping conduction describes the electrical conductivity, and the noise has a 1/fγ component. The exponent γ for temperatures below 400 K is approximately 1, and the noise follows the Hooge model. For temperatures between 240 K and 380 K, the 1/f noise was found to be independent of the conductivity. Therefore, the carrier concentration does not change appreciably with temperature and the change in conductivity is due to the temperature dependence of the hole mobility. The normalized Hooge parameter correlates with the Mott hopping parameter, T0M, and in turn, to the material dopant boron concentration and hydrogen dilution levels. For temperatures above 400 K, the frequency exponent, γ, is larger than 1, indicative of a generation-recombination trap contribution to the noise. From the dependence of the normalized Hooge parameter to the Mott characteristic temperature T0M, we conclude that the electrical 1/f noise in p-type a-Si:H is associated with hopping conduction.
Related Topics
Physical Sciences and Engineering
Materials Science
Ceramics and Composites
Authors
V.C. Lopes, A.J. Syllaios, C.L. Littler,