Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
5454224 | Journal of Nuclear Materials | 2017 | 11 Pages |
Abstract
Samples of pre-oxidized Alloy X-750 were exposed to a simulated boiling water reactor environment in an autoclave at a temperature of 286 °C and a pressure of 80 bar for four weeks. The effect of alloy iron content on corrosion was investigated by comparing samples with 5 and 8 wt% Fe, respectively. In addition, the effect of two different surface pre-treatments was investigated. The microstructure of the formed oxide scales was studied using mainly electron microscopy. The results showed positive effects of an increased Fe content and of removing the deformed surface layer by pickling. After four weeks of exposure the oxide scale consists of oxides formed in three different ways. The oxide formed during pre-oxidization at 700 °C, mainly consisting of chromia, is partly still present. There is also an outer oxide consisting of NiFe2O4 crystals, reaching a maximum size of 3 μm, which has formed by precipitation of dissolved metal ions. Finally, there is an inner nanocrystalline and porous oxide, with a metallic content reflecting the alloy composition, which has formed by corrosion.
Related Topics
Physical Sciences and Engineering
Energy
Nuclear Energy and Engineering
Authors
Silvia Tuzi, Haiping Lai, Kenneth Göransson, Mattias Thuvander, Krystyna Stiller,