Rotordynamics and bearing design of turbochargers

Turbochargers have gained significant attention in recent years. They are already widely used in automotive, locomotive, and marine applications with diesel engines. They are also applied in the aerospace application to increase the engine performance now. The turbochargers used in automotive and aerospace industry are very light-weight with operating speeds above 100,000 rpm. The turbochargers used in locomotive and marine applications are relatively heavy in size and power compared to the automotive and aerospace applications, and the maximum continuous operating speeds are around 30,000 rpm depending on the diesel engine power rating. Floating ring bushings, semi-floating dampers, ball bearings, and ball bearings with dampers are commonly used in automotive applications for small turbochargers. However, these bearings may not be appropriate for large turbochargers in locomotive and marine applications. Instead, multi-lobed bearings with and without squeeze film dampers are commonly used in these heavy-duty turbochargers.This paper deals with the rotordynamic characteristics of larger turbochargers in locomotive and marine applications. Various bearing designs are discussed. Bearing design parameters are studied and optimal values are suggested. Test results are also presented to support the analytical simulation.

► The rotordynamics and bearing design of larger turbochargers have been studied. ► The optimal bearing design parameters are suggested. ► Bearings have been successfully applied and operated in many turbochargers. ► Test results are presented to support the analytical simulation.