Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
561762 | Mechanical Systems and Signal Processing | 2010 | 13 Pages |
During the last decades the increase in power of mechanical systems and the demand for increasing service life leads mechanical components of a system to work in extreme conditions. Moreover, actual mechanical systems include surfaces in sliding contact that are subjected to wear if exposed to high vibration. In fact, the vibration of components in contact results in large oscillations of the local contact stresses, due to the local deformation of the components at the contact interfaces. To approach correctly tribological problems, the coupling between the scale of the mechanism (system dynamics) and the scale of the contact needs to be accounted for.This paper presents an analysis concerning the influence of the vibrations induced by aircraft engines on the contact stresses of rolling bearings of the bleed system valves. To study the wear, resulting from false brinelling at the contact surfaces between balls and races of the bearings, it is then necessary to determine the forces due to the system vibrations and acting at the bearing connections with the structure. In order to perform a numerical transient analysis of the system dynamics a nonlinear simplified model of the valve (mechanism scale) is developed. The model is validated by comparing the numerical results with experimental tests. The time behaviour of the global forces on the bearings, and the respective displacements between the contact surfaces, are then used as inputs for a finite element model of the bearings (contact scale). The model is used to calculate and analyze the behaviour in time of the local contact constraints between race and balls. This analysis, developed in the framework of a European project, is an example of the proposed general approach to contact problems, by coupling the analysis of the mechanism and contact scales.