| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 592457 | Colloids and Surfaces A: Physicochemical and Engineering Aspects | 2015 | 6 Pages |
•A electrochemical sensor based on nano-particles, Cu@CuO/GCE, was constructed.•The catalytic performance of the sensor was studied with the use of DPV technique.•This sensor showed good electrocatalytic activity for the analysis of H2O2.
A novel electrochemical sensor was constructed by depositing copper/copper oxide nano-particles on a glassy carbon electrode (GCE) to produce a Cu@CuO/GCE. The morphology and composition of this modified electrode were characterized with the use of scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) techniques. The electrochemical properties of the novel modified GCE electrode were studied using various electrochemical techniques such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The catalytic performance of the sensor was studied with the use of differential pulse voltammetry (DPV) under optimized conditions. The constructed Cu@CuO/GCE sensor showed significantly better electrocatalytic activity for the analysis of the H2O2 in comparison to the Cu/GCE or GCE. The novel sensor produced a linear response for H2O2 analysis in the range of 0.005–8 mM and the detection limit was 0.23 μM (S/N = 3). Satisfactory results were obtained for H2O2 analyses of tap and lake waters. This performance compares very favorably with the results from several other commonly used techniques for analysis of H2O2.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide
