Article ID Journal Published Year Pages File Type
593726 Colloids and Surfaces A: Physicochemical and Engineering Aspects 2013 12 Pages PDF
Abstract

Transparent superhydrophobic nanocoating, possessing a sub-100 nm roughness, a high water contact angle (>160°) and a low sliding angle (<5°), has been prepared by a simple sol–gel dip-coating method. The desired hierarchical sub-100 nm roughness, which renders the nanocoating transparency, was created by using 3-aminopropyltriethoxylsilane (APTEOS) as aggregated agent. Cetyltrimethoxylsilane (CTMS) was adopted as modifying agent subsequently to give the nanocoating superhydrophobicity. The influence of experiment parameters on the transparency and superhydrophobicity of as-prepared nanocoating were investigated herein to get the optimum preparing conditions. The obtained nanocoating before and after modification were characterized and confirmed by various technologies including Fourier transform infrared (FT-IR) spectroscopy, 29Si CP (cross-polarization) MAS NMR, X-ray photoelectron spectroscopy (XPS), thermal analysis, atomic force microscopy (AFM) and transmission electron microscopy (TEM). The as-prepared transparent superhydrophobic nanocoating exhibits a good moisture resistance, and it could switch from superhydrophobic (>160°) to superhydrophilic (0°) after heat-treating at a temperature higher than 500 °C.

Graphical abstractTransparent superhydrophobic nanocoating, possessing a good moisture resistance, had been developed by a simple sol–gel dip-coating method. 3-Aminopropyltriethoxylsilane (APTEOS) was adopted as aggregated agent to give the nanocoating transparency, and cetyltrimethoxylsilane (CTMS) was used as modifying agent to render the nanocoating superhydrophobicity.Figure optionsDownload full-size imageDownload as PowerPoint slideHighlights► Transparent superhydrophobic nanocoating was prepared by a simple sol–gel method. ► Desired sub-100 nm roughness was created by adding 3-aminopropyltriethoxylsilane. ► The prepared nanocoating possesses a good moisture resistance. ► The nanocoating could switch from superhydrophobic to superhydrophilic by heating.

Related Topics
Physical Sciences and Engineering Chemical Engineering Colloid and Surface Chemistry
Authors
, , , ,