| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 593999 | Colloids and Surfaces A: Physicochemical and Engineering Aspects | 2012 | 8 Pages |
This article presents the development of a microfluidic valve to be used in capillary flow microfluidic devices. The valve used the principle of electrowetting and was able to be actuated at low voltage. The valve consisted of two inkjet-printed silver electrodes which were encountered in series within a microfluidic channel. The second electrode was modified with a hydrophobic monolayer resulting in a cessation of capillary flow. A potential of 4 V resulted in a 70° reduction in apparent water contact angle within 10 s which allowed capillary flow to continue. The electrode surface chemistry was investigated prior to monolayer deposition, after monolayer deposition and following the application of the 4 V potential. The flexible microfluidic channel consisted of two layers of polyethylene terephthalate bonded by a pressure sensitive adhesive layer which was patterned with a laser ablated microfluidic channel. The final device represented a microfluidic valve for capillary flow microfluidics realized on a flexible substrate. The valve was designed to allow timed fluid delivery for low-cost lab-on-a-chip applications.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► An electrowetting valve for capillary flow microfluidics is proposed. ► The analysis of hydrophobic monolayers on printed silver electrodes was performed. ► Low voltage electrowetting was conducted on the printed electrodes. ► The chemical composition of the valve before and after actuation was determined. ► The valve was tested in a flexible microfluidic device with printed electrodes.
