| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 594775 | Colloids and Surfaces A: Physicochemical and Engineering Aspects | 2011 | 5 Pages |
Novel zonal thiol-functionalized silica nanofibers were fabricated for the removal of heavy metal ions from waste water by the sol–gel polymerization of 3-mercaptopropyl trimethoxysilane on the electrospun polyacrylonitrile (PAN) nanofibers, followed by removal of PAN nanofibers using dimethylformamide dissolution. The removal of PAN templates resulted in higher surface areas. As self-supporting adsorbents, these zonal silica nanofibers are efficient in removing mercury from aqueous waste streams with a maximum adsorptive capacity of 57.49 mg/g due to the introduction of thiol groups onto the surface of nanofibers and the increased surface areas of nanofibers. The adsorption equilibrium was obtained for only about 30 min, suggesting that the –SH groups were readily available and easily accessible because the uniform porous channels between nanofibers facilitated the Hg2+ transportation in the adsorption process.
Graphical abstractNovel zonal thiol-functionalized silica nanofibers were fabricated for the removal heavy metal ions from waste water by the sol–gel polymerization of (3-mercaptopropyl)trimethoxysilane on the electrospun polyacrylonitrile (PAN) nanofibers, followed by removal of PAN nanofibers using dimethylformamide dissolution. The removal of PAN templates resulted in higher surface areas.Figure optionsDownload full-size imageDownload as PowerPoint slideHighlights► Novel zonal silica nanofibers were fabricated by the sol–gel polymerization of (3-mercaptopropyl)trimethoxysilane on the electrospun polyacrylonitrile nanofibers, followed by removal of PAN nanofibers using DMF dissolution. ► The removal of PAN templates resulted in higher surface areas. ► As self-supporting adsorbents, these zonal silica nanofibers are efficient in removing mercury from aqueous waste streams due to the introduction of thiol groups onto the surface of nanofibers and the increased surface areas of nanofibers. ► The technique route will enable rational design of other zonal silica nanofiber materials.
