Article ID Journal Published Year Pages File Type
598347 Colloids and Surfaces A: Physicochemical and Engineering Aspects 2006 10 Pages PDF
Abstract

Electrochemical measurements were performed to investigate the effectiveness of cationic surfactants of the N-alkyl quaternary ammonium salt type, i.e. myristyltrimethylammonium chloride (MTACl), cetyldimethylbenzylammonium chloride (CDBACl), and trioctylmethylammonium chloride (TOMACl), as corrosion inhibitors for type X4Cr13 ferritic stainless steel in 2 M H2SO4 solution. Potentiodynamic polarization measurements showed that these surfactants hinder both anodic and cathodic processes, i.e. act as mixed-type inhibitors. It was found that the adsorption of the N-alkyl ammonium ion in 2 M H2SO4 solution follows the Langmuir adsorption isotherm. Plots of log [θ/(1 − θ)] versus log cinh yielded straight lines with a slope, which changed drastically at the critical micelle concentration (CMC) of the surfactants studied. Accordingly, the CMC could be accurately determined from these measurements. The calculated values of the free energy of adsorption ΔGads are, in cases when the charge on the metal surface is negative with respect to the PZC, relatively high what is characteristically for the chemisorption. On the other hand, for positive metal surfaces it is assumed that SO42− anions are adsorbed first, so the cationic species would be limited by the surface concentration of anions. Accordingly ΔGads values were lower in this case and the adsorption is due to merely electrostatic attraction, which is characteristically of physisorption.

Related Topics
Physical Sciences and Engineering Chemical Engineering Colloid and Surface Chemistry
Authors
,