Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
646098 | Applied Thermal Engineering | 2014 | 9 Pages |
Abstract
HFC-245fa is a common working fluid used in Organic Rankine Cycles generating mechanical power from low temperature heat. This paper compares the predicted ORC performance of two novel low GWP working fluids, HCFO-1233zd-E and HFO-1336mzz-Z, to HFC-245fa over a wide range of evaporating temperatures, condensing temperatures and vapour superheat values. Expander power output, required pump power input, net cycle efficiencies, mass flow rates and turbine size parameters with HCFO-1233zd-E, HFO-1336mzz-Z and HFC-245fa were compared for a given thermal power input. HCFO-1233zd-E and HFO-1336mzz-Z are predicted to have attractive thermodynamic Rankine power cycle performance. HCFO-1233zd-E would require 10.3%-17.3% lower pump power and would enable up to 10.6% higher net cycle efficiencies than HFC-245fa over the range of cycle conditions examined in this paper. The turbine size required with HCFO-1233zd-E would be up to about 7.5%-10.2% larger than with HFC-245fa. HFO-1336mzz-Z would require 36.5%-41% lower pump power and would enable up to 17% higher net cycle efficiencies than HFC-245fa over the range of cycle conditions examined in this paper. The turbine size required with HFO-1336mzz-Z would be up to about 30.9%-41.5% larger than with HFC-245fa. HFO-1336mzz-Z cycle efficiency is benefitted substantially by a recuperator. The net cycle efficiency increases and the required turbine size decreases relative to HFC-245fa for HCFO-1233zd-E and for HFO-1336mzz-Z at higher evaporating and condensing temperatures.
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Fluid Flow and Transfer Processes
Authors
Francisco Molés, JoaquÃn Navarro-EsbrÃ, Bernardo Peris, Adrián Mota-Babiloni, Ángel Barragán-Cervera, Konstantinos (Kostas) Kontomaris,