Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
646709 | Applied Thermal Engineering | 2014 | 8 Pages |
•An existing office building was monitored for a year.•A model of a ventilated façade by TRNSYS simulation tool was validated.•Air flow parameters inside the ventilated façade were identified.•Recovery of the hot air inside the façade for input into the building was studied.
A model for a building with ventilated façade was created using the software tool TRNSYS, version 17, and airflow parameters were simulated using TRNFlow. The results obtained with the model are compared and validated with experimental data. The temperature distribution along the air cavity was analysed and a chimney effect was observed, which produced the highest temperature gradient on the first floor. The heat flux of the external wall was analysed, and greater temperatures were observed on the external layer and inside the cavity. The model allows to calculate the energy demand of the building façade proposing and evaluating passive strategies.The corresponding office building for computer laboratories located in Valencia (Spain), was monitored for a year. The thermal behaviour of the floating external sheet was analysed using an electronic panel designed for the reading and storage of data. A feasibility study of the recovery of hot air inside the façade into the building was performed. The results obtained showed a lower heating demand when hot air is introduced inside the building, increasing the efficiency of heat recovery equipment.