Thermodynamic analysis of an ejector-flash tank-absorption cooling system

•A modified combined ejector-absorption cycle by adding flash tank is proposed.•The performance of the combined cycle is compared before and after modification.•Exergy analysis is used to evaluate the performance of both cases.•Higher COP and COPexe is shown for the combined cycle after the modification.•Statistical T-test ensured significant improvement on modified cycle performance.

The performance of a combined ejector-absorption cooling cycle has the potential for further investigation. Improving the performance of the system can be achieved by adding a flash tank to the combined cycle. In this study, an analysis based on the second law of thermodynamics is used to evaluate the cycle before and after modification. A mathematical model is developed to calculate the entropy generation in each component and the total entropy generation of the system, as well as to evaluate the exergy losses. Under operating conditions that match the ambient conditions and a certain application in Malaysia (Tgen = 85 °C; Tcond = Tabs = 30 °C; and Tevp = 0 °C), the coefficient of performance (COP) and exergetic efficiency (COPexe) values before and after modification are (0.844, 0.875) and (0.459, 0.476), respectively. The maximum exergy loss is found in the evaporator in both cycles, followed by the condenser and the absorber. A statistical t-test is carried out to establish the significance of the differences in the COP and the COPexe before and after modification. It is found that there is significant improvement in combined cycle performance after modification. Overall, adding the flash tank to the combined cycle can be considered a novel enhancement.