Article ID Journal Published Year Pages File Type
647962 Applied Thermal Engineering 2011 9 Pages PDF
Abstract

This work presents the configuration optimization of regularly spaced short-length twisted tape in a circular tube for turbulent heat transfer in air using computational fluid dynamics (CFD) modeling. The configuration parameters include the free space ratio (s), twist ratio (y) and rotated angle (α). The computational results are in good agreement with experimental data. The results indicate that the larger rotated angle yields a higher heat transfer value and a greater flow resistance, whereas the smaller twist ratio results in better heat transfer performance using a twist ratio ranging from 2.5 to 8.0 except for a large rotated angle and a high Reynolds number (e.g., α = 360° and Re = 20,200). However, the minimum resistance factor occurs if the twist ratio is in the range of 4.75–5.75. The optimal design of regularly spaced short-length twisted tape in a circular tube for turbulent air flow is y = 4.25–4.75, α = 180° and s = 28–33 with a Reynolds number that varies from 10,000 to 20,200. If the heat transfer rate is more important, the second design of y = 4.25–4.75, α = 270° and s = 28–33 in the range of Reynolds numbers from 10,000 to 20,200 can be used as a reference for industrial application.

Research highlights► The optimal configuration was gotten to enhance turbulent heat transfer. ► The maximum heat transfer enhancement efficiency is 1.079. ► The turning point of dominant contribution to the total resistance from form resistance to frictional resistance causes the minimum resistance factor.

Related Topics
Physical Sciences and Engineering Chemical Engineering Fluid Flow and Transfer Processes
Authors
, , , , , , , , ,