| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 647991 | Applied Thermal Engineering | 2011 | 6 Pages |
Phase change materials (PCMs) can be used to shift the cooling or heating load from the peak period to the off-peak period. In this paper, a new double layer phase change material (PCM) floor is put forward. The two layers of PCM have different melting temperature. The system is used to store heat or cold energy in the off-peak period and release them in the peak period during heating or cooling. According to the numerical model built in this paper, the thermal performances of the floor are analyzed. The results show that the optimal melting temperatures of PCMs exist. The fluctuations of the floor surface temperatures and the heat fluxes will be reduced and the system still can provide a certain amount of heat or cold energy after the heat pump or chiller has been turned off for a long time. Compared to the floor without PCM, the energy released by the floor with PCM in peak period will be increased by 41.1% and 37.9% during heating and cooling when the heat of fusion of PCM is 150 kJ/kg.
► A new double layer phase change material floor is put forward. ► The system is used to store heat or cold energy in the off-peak period and release them in the peak period during heating or cooling. ► The optimal melting temperatures of PCMs in the system exist. ► The heat and cold energy released by the floor with PCM in peak period can be increased by 41.1% and 37.9%.
