Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
649132 | Applied Thermal Engineering | 2007 | 17 Pages |
A novel solar water heating system, modified cuboid solar integrated-collector-storage (ICS) system with transparent insulation material (TIM) has been designed and developed, which combines collection and storage in a single unit and minimizes the nocturnal heat losses. A comprehensive study has been carried out to evaluate the heat transfer characteristics inside the enclosure of the system to enhance the collection and storage of solar energy. The transient behavior of the modified-cuboid solar integrated-collector-storage system is investigated numerically to evolve optimum configuration. The optimum design for the system is obtained by carrying out a numerical parametric study with different geometry parameters like the depth of the cuboid (d = 2, 5, 8, and 12 cm), and inclination angles (10°, 20°, 30°, and 50°). The inside heat transfer coefficient of the ICS system, stratification factor and water temperature distribution inside the enclosure have been predicted by numerical simulation. Average heat transfer coefficient at the bottom surface of absorber plate is 20% higher for depth of 12 cm as compared to the 2 cm depth of cuboid section, after 2 h of heating. The stratification factor also increases from 0.02 to 0.065 as depth of the system increases from 2 cm to 12 cm. There is a marginal effect of inclination angles of the system on the convection in the enclosure. As the inclination angle increases from 10° to 50°, the average heat transfer coefficient increases from 90 W/m2 K to 115 W/m2 K. But the stratification factor is comparatively high for lower inclination angles. With the optimum design parameters, a field experimental set-up was built and the numerical model was validated for efficient heat collection and storage in a modified cuboid ICS system. The model is in good agreement with the experimental results.