Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
6679658 | Applied Energy | 2018 | 11 Pages |
Abstract
Impurities are unavoidable during CO2 geological storage, and they would potentially affect the plume spread as well as storage capacity and/or efficiency of CO2. The current study numerically investigated the effects of binary impurities comprising typical components N2 and H2S on CO2 geological storage in stratified formations. For a fixed total content of the binary impurities, increasing ratio of N2/H2S resulted in larger plume spread which meant a higher dissolution trapping efficiency. Because of the backflow of formation brine during the post-injection period, the residual trapping efficiency decreased while the dissolution trapping efficiency increased. This tendency was reinforced with increasing ratio of N2/H2S. Besides, this work examined the effects of the ratio of vertical permeability (kv) to horizontal permeability (kh) and the addition of an injection point in the stratified formation. It was found that lower kv/kh shrunk the plume spread and intensified the maximum pressure build-up. However, in the case of two injection points, the plume in the vertical direction was elongated and the maximum pressure build-up was lessened. The results should be taken into consideration to determine the types and concentrations of impurities allowed in the injected CO2 stream as well as the site selection and injection design for impure CO2 geological storage in stratified formation.
Keywords
Related Topics
Physical Sciences and Engineering
Energy
Energy Engineering and Power Technology
Authors
Didi Li, Hongcheng Zhang, Yang Li, Wenbin Xu, Xi Jiang,