Experimental and analytical characterization of steel shear links for seismic energy dissipation

SL device is conceived to be connected to the main frame through bolted connections and mounted on a supporting brace. In particular, slotted holes on one edge of the damper prevent the device from transmitting shear to the upper beam during the seismic excitation. A couple of specimens for each of 5 different geometries has been tested, for a total of 10 tests. Two different boundary configurations have been considered, analyzing results of fully-tightened or not fully-tightened bolts in correspondence of slotted holes. The set-up system has been properly designed to apply forces up to 1000 kN, to be able to accommodate and test the largest specimens of the set. The paper presents the experimental results and data processing concerning analysis of deformation process, hardening behavior and collapse. The main features of the control devices are highlighted, above all, the high dissipative capability that is mainly due to the particular shape of the steel damper, which leads to a high buckling resistance.