Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
6949525 | ISPRS Journal of Photogrammetry and Remote Sensing | 2015 | 11 Pages |
Abstract
This research assumes lidar as a reference dataset against which in-flight camera system calibration and validation can be performed. The methodology utilises a robust least squares surface matching algorithm to align a dense network of photogrammetric points to the lidar reference surface, allowing for the automatic extraction of so-called lidar control points (LCPs). Adjustment of the photogrammetric data is then repeated using the extracted LCPs in a self-calibrating bundle adjustment with additional parameters. This methodology was tested using two different photogrammetric datasets, a Microsoft UltraCamX large format camera and an Applanix DSS322 medium format camera. Systematic sensitivity testing explored the influence of the number and weighting of LCPs. For both camera blocks it was found that when the number of control points increase, the accuracy improves regardless of point weighting. The calibration results were compared with those obtained using ground control points, with good agreement found between the two.
Related Topics
Physical Sciences and Engineering
Computer Science
Information Systems
Authors
A.S. Gneeniss, J.P. Mills, P.E. Miller,