Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
7045923 | Applied Thermal Engineering | 2018 | 25 Pages |
Abstract
MgCl2·6H2O is a promising inorganic phase change material (PCM) with abundant resources from salt lakes, while its wide applications are greatly hampered by the drawbacks of phase separation, supercooling and corrosivity, inherent in hydrated salts. Herein a novel expanded graphite (EG) based composite PCM containing MgCl2·6H2O was explored, which involved modifying EG for increasing its hydrophilicity, compressing the modified EG (MEG) into round blocks, and immersing the blocks into melted MgCl2·6H2O. The optimal mass ratio of TX-100 to EG and the favorable packing density of the MEG block are determined to be around 0.06 and 350â¯kg/m3, at which the adsorptive capacity of the modified EG block reaches 80% for MgCl2·6H2O, larger than 73% of the unmodified one. The as-prepared MgCl2·6H2O/MEG composite block, which consists of 80.1% of MgCl2·6H2O, 1.1% of TX-100, and 18.8% of EG, maintains a similar melting point to that of MgCl2·6H2O, and its latent heat is as high as 116.7â¯J/g. Furthermore, the supercooling degree of the composite block is found to be around 1.3â¯Â°C, much less than 11.2â¯Â°C of MgCl2·6H2O. The thermal conductivity of the composite block is about 7.7 times as large as that of MgCl2·6H2O. And the composite exhibits a decrease only by 2.7% in phase change enthalpy after 500 thermal cycles, much lower than 41.7% for MgCl2·6H2O. These good thermal characteristics make the MgCl2·6H2O/MEG composite PCM show great potentials in practical applications.
Keywords
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Fluid Flow and Transfer Processes
Authors
Siyu Zhou, Yan Zhou, Ziye Ling, Zhengguo Zhang, Xiaoming Fang,