Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
7111472 | Diamond and Related Materials | 2014 | 6 Pages |
Abstract
For biomedical application in the field of artificial hip joints diamond-like carbon (DLC) coatings have been widely studied due to their tribological properties. The wear particles as the main factor limiting the life expectancy of hip joints have attracted more and more interest, not only the number of them, but also the distribution of their size. In this study we have deposited DLC coatings on stainless steel (P2000) by a vacuum arc adjustable from anodic to cathodic operation mode, with the anode-cathode diameter ratio of da/dc = 3/1 at a DC bias of â 250 V to â 1000 V. To improve the adhesion of the DLC coating on P2000, titanium as a metallic interlayer was deposited by cathodic vacuum arc evaporation. The internal structure of the coating was investigated by the visible Raman spectroscopy with the four-Gaussian curve fitting method. Comparing the results with the previous work (coatings deposited with da/dc = 1/1), it was found that the anode-cathode diameter ratio has an effect on the structure (e.g. ID/IG) as well as the wear particle size distribution. It was shown that the maximum of the frequency distribution e.g. at â 1000 V bias can be shifted to below 1 μm with increasing da/dc.
Related Topics
Physical Sciences and Engineering
Engineering
Electrical and Electronic Engineering
Authors
Ying Ren, Ingo Erdmann, Victoria Khlopyanova, Friederike Deuerler, Volker Buck,