Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
73502 | Microporous and Mesoporous Materials | 2013 | 6 Pages |
In the literature, different approaches, terminologies, concepts and equations are used for calculating gas storage capacities. Very often, these approaches are not well defined, used and/or determined, giving rise to significant misconceptions. Even more, some of these approaches, very much associated with the type of adsorbent material used (e.g., porous carbons or new materials such as COFs and MOFs), impede a suitable comparison of their performances for gas storage applications. We review and present the set of equations used to assess the total storage capacity for which, contrarily to the absolute adsorption assessment, all its experimental variables can be determined experimentally without assumptions, ensuring the comparison of different porous storage materials for practical application. These material-based total storage capacities are calculated by taking into account the excess adsorption, the bulk density (ρbulk) and the true density (ρtrue) of the adsorbent. The impact of the material densities on the results are investigated for an exemplary hydrogen isotherm obtained at room temperature and up to 20 MPa. It turns out that the total storage capacity on a volumetric basis, which increases with both, ρbulk and ρtrue, is the most appropriate tool for comparing the performance of storage materials. However, the use of the total storage capacities on a gravimetric basis cannot be recommended, because low material bulk densities could lead to unrealistically high gravimetric values.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► Suitable equations for calculating gas storage capacities are presented. ► Total storage capacities can be obtained experimentally from material densities. ► Impact of material densities is studied for H2 adsorption at RT and up to 20 MPa. ► Volumetric total storage capacity is suitable for evaluation of storage materials. ► Gravimetric total storage capacity may lead to unrealistically high values.