| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 74136 | Microporous and Mesoporous Materials | 2012 | 7 Pages |
A new application of on-line tandem differential mobility-particle mass analysis (DMA-APM) is used to obtain the density distribution, detect the reaction evolution, and investigate the mechanism of porous particle formation. The expected uncertainty of the density measurement is within 5%. The method has several advantages over absorption methods such as BET in which pore model is required. The methodology also enables a size resolved measurement to understand how particle porosity varies over a given particle population. The DMA-APM method is materials independent, and can measure the density even in a particle with inaccessible pores. In this paper we demonstrate the method during the synthesis of mesoporous iron oxide and copper oxide. For example in the formation of iron oxide we found that small particles (∼50 nm) in the size distribution had a higher density (∼2.6 g/cm3) relative to larger 130 nm particles with a measured density of 2.2 g/cm3. Syntheses at higher temperatures lead to high density particles which were also less size sensitive.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► We demonstrate an on-line method to measure size resolved density of porous particles. ► Combined differential mobility analyzer with a particle mass analyzer. ► Simultaneous size resolved measurement of size and mass. ► We determined the expected uncertainty of the density measurement to be within 5%. ► Materials independent; measures density even in a particle with inaccessible pores.
