| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 74339 | Microporous and Mesoporous Materials | 2010 | 5 Pages |
Two different kinds of mesoporous alumina samples were prepared using aluminum tri-sec-butoxide in the presence of either cetyltrimethylammonium bromide (MA-1) or stearic acid (MA-2) as a structure-directing agent, and tested for adsorptive removal of fluoride in water. Both materials contain a wormhole-like mesopore structure, but exhibited different textural properties: surface area (421 or 650 m2/g) and pore volume (0.96 or 0.59 cm3/g). These mesoporous aluminas demonstrated significantly improved adsorption capacity and faster kinetics to those of the commercial activated aluminas in fluoride removal by adsorption process. MA-2 prepared using stearic acid, in particular, demonstrated an adsorption capacity (14.26 mg/g) and initial adsorption rate (14.6 mg/g min) that were respectively 2.2 and 45 times higher than those of a commercial gamma alumina. The textural features of larger surface area and relatively smaller pore size in MA-2 compared to the activated aluminas are believed to be responsible for this enhancement in adsorption process.
