Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
7707588 | International Journal of Hydrogen Energy | 2018 | 12 Pages |
Abstract
Coal hydrogasification processes including wire-mesh grid reactor, batch reactor, curie-point pyrolyzer, fixed bed reactor and so on were utilized or developed in laboratory researches. Although the experimental results could help to understand the basic behavior of coal hydrogasification, it was difficult to directly utilize such data for devising a new hydrogasifier. This paper designed a continuous entrained flow bed facility and described the hydrogasification characteristics. This device (15-30 kg/d) mainly consisted of a high-H2 pressure feed system, a high-temperature tube reactor. The capabilities were shown as follows: the temperature from 700 °C to 850 °C, H2 pressure from 0.1 MPa to 3.0 MPa, isothermal zone 300-600 mm, feeding rate from 15 to 30 kg/d and water yield was easy to obtained by tar-water separation. The good mass balance on the carbon and weight basis was established by analyzing the product distribution in detail. The results showed the yields of CH4 and light aromatic hydrocarbons increased through hydrogenation of tar and volatiles, hydrogasification of coal char. Although the small pilot plant had high heat loss through refractory with increasing H2 pressure, the typical results obtained from the continuous stable operation of the entrained flow bed reactor confirmed the design of new large-scale hydrogasification process was technical feasibility.
Keywords
Related Topics
Physical Sciences and Engineering
Chemistry
Electrochemistry
Authors
Shenfu Yuan, Jicheng Bi, Xuan Qu, Qiuxiang Lu, Qiue Cao, Wei Li, Guini Yao, Qiufeng Wang, Jiliang Wang,