Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
77953 | Solar Energy Materials and Solar Cells | 2014 | 7 Pages |
•J0 of 5 fA/cm² for n-type poly-Si and 10 fA/cm² for p-type poly-Si layers achieved.•Contact resistances of poly-Si/c-Si junctions smaller than 0.1 Ω cm² achieved.•Voc of 714 mV on full poly-Si contacted solar cell device achieved.
We present an investigation of the electrical characteristics – recombination and contact resistance – of poly-crystalline (poly) Si/mono-crystalline (c) Si junctions and of the influence of the interfacial oxide between the poly-Si and the c-Si on these characteristics. In particular, we compare thermally grown oxides with different thickness values with wet chemically grown oxides. Both n- and p-type poly-Si emitters are investigated. For one combination (n-type poly-Si, thermal oxide), we compare planar and textured surfaces.For all oxide types investigated, we achieve combinations of low recombination current densities <20 fA/cm² and low specific contact resistances <0.1 Ω cm². The corresponding implied open-circuit voltages measured on our test structures are 732 mV (n-type poly-Si) and 711 mV (p-type poly-Si). By applying these poly-Si layers on a solar cell structure, we achieve an open-circuit voltage of 714 mV and a series resistance of 0.6 Ω cm².