Improving charge-collection efficiency of SOI pixel sensors for X-ray astronomy

We have been developing a new type of active pixel sensor, referred to as “XRPIX” for future X-ray astronomy satellites on the basis of silicon-on-insulator CMOS technology. The problem on our previous device, XRPIX1b, was degradation of the charge-collection efficiency (CCE) at pixel borders. In order to investigate the non-uniformity of the CCE within a pixel, we measured sub-pixel response with X-ray beams whose diameters are 10μmΦ at SPring-8. We found that the X-ray detection efficiency and CCE degrade in the sensor region under the pixel circuitry placed outside the buried p-wells (BPW). A 2D simulation of the electric fields with the semiconductor device simulator HyDeLEOS shows that the isolated pixel circuitry outside the BPW makes local minimums in the electric potentials at the interface between the sensor and buried oxide layers, where a part of charge is trapped and is not collected to the BPW. Based on this result, we modified the placement of the in-pixel circuitry in the next device, XRPIX2b, for the electric fields to be converged toward the BPW, and confirmed that the CCE at pixel borders is successfully improved.