Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
84364 | Computers and Electronics in Agriculture | 2013 | 5 Pages |
LiDAR (Light Detection And Ranging) is a remote-sensing technique for the measurement of the distance between the sensor and a target. A LiDAR-based detection procedure was tested for characterisation of the weed vegetation present in the inter-row area of a maize field. This procedure was based on the hypothesis that weed species with different heights can be precisely detected and discriminated using non-contact ranging sensors such as LiDAR. The sensor was placed in the front of an all-terrain vehicle, scanning downwards in a vertical plane, perpendicular to the ground, in order to detect the profile of the vegetation (crop and weeds) above the ground. Measurements were taken on a maize field on 3 m wide (0.45 m2) plots at the time of post-emergence herbicide treatments. Four replications were assessed for each of the four major weed species: Sorghum halepense, Cyperus rotundus, Datura ferox and Xanthium strumarium. The sensor readings were correlated with actual, manually determined, height values (r2 = 0.88). With canonical discriminant analysis the high capabilities of the system to discriminate tall weeds (S. halepense) from shorter ones were quantified. The classification table showed 77.7% of the original grouped cases (i.e., 4800 sampling units) correctly classified for S. halepense. These results indicate that LiDAR sensors are a promising tool for weed detection and discrimination, presenting significant advantages over other types of non-contact ranging sensors such as a higher sampling resolution and its ability to scan at high sampling rates.
► A terrestrial-based LiDAR system for weed detection in maize was developed. ► We examine whether different species can be precisely discriminated by their height. ► LiDAR sensors provide higher spatial and temporal sampling resolutions.