Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
1286509 | Journal of Power Sources | 2014 | 9 Pages |
•The stop–start cycling of a conventional VRLA battery was modeled.•The effect of stop–start cycling on electrode sulfation aging was analyzed.•Cranking pulses produce high overpotentials at the negative/separator interface.•Parametric studies were done to analyze their effects on sulfation over cycling.
The cranking and charging processes of a VRLA battery during stop–start cycling in micro-hybrid applications were simulated by one dimensional mathematical modeling, to study the formation and distribution of lead sulfate across the cell and analyze the resulting effect on battery aging. The battery focused on in this study represents a conventional VRLA battery without any carbon additives in the electrodes or carbon-based electrodes. The modeling results were validated against experimental data and used to analyze the “sulfation” of negative electrodes – the common failure mode of lead acid batteries under high-rate partial state of charge (HRPSoC) cycling. The analyses were based on two aging mechanisms proposed in previous studies and the predictions showed consistency with the previous teardown observations that the sulfate formed at the negative interface is more difficult to be converted back than anywhere else in the electrodes. The impact of cranking pulses during stop–start cycling on current density and the corresponding sulfate layer production was estimated. The effects of some critical design parameters on sulfate formation, distribution and aging over cycling were investigated, which provided guidelines for developing models and designing of VRLA batteries in micro-hybrid applications.