| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 1288093 | Journal of Power Sources | 2013 | 9 Pages |
Three kinds of oxidant are synthesized, ferric benzenesulfonate (Fe(OBs)3), ferric 4-methylbenzenesulfonate (Fe(OMBs)3), and ferric 4-ethylbenzenesulfonate (Fe(OEBs)3). Then, 3,4- ethylenedioxythiophene (EDOT) is polymerized with these oxidants to obtain benzenesulfonate-doped poly(3,4- ethylenedioxythiophene) (PEDOT-OBs), 4-methyl-benzenesulfonate-doped poly(3,4- ethylenedioxythiophene) (PEDOT-OMBs) and 4-ethyl-benzenesulfonate-doped poly(3,4- ethylenedioxythiophene) (PEDOT-OEBs), respectively. PEDOT-OBs had the highest surface conductivity among the fabricated materials, because PEDOT-OBs had a better defined crystalline structure than the other polymers and the doping concentration of PEDOT-OBs is much higher than that of PEDOT-OMBs and PEDOT-OEBs. The capacitance of PEDOT-OBs is higher than those of PEDOT-OMBs and PEDOT-OEBs while the equivalent series resistance (ESR) and leakage current values of PEDOT-OMBs is lower than those of PEDOT-OMBs and PEDOT-OEBs because of the high electrical conductivity and low amount of undoped oxidant in PEDOT-OBs. Thermal degradation of all polymerized materials occur in the range of 300–330 °C, indicating that all of the polymerized materials had excellent thermal stability.
► Synthesized oxidant show high doping level and electrical conductivity. ► Higher doping level prevents the dielectric oxide films from damage. ► Decreased damaged surface area help to enhance the capacitance and leakage current. ► Enhanced electrical conductivity affect to the decrease of ESR property. ► Newly synthesized electrolytes exhibit excellent electrochemical performance.
